We're offering a free installation of Lundy Electronics' Dram to Sram Converter Board.
What this kit does? (PLEASE READ)
The Lundy Electronics ColecoVision NTSC DRAM to SRAM Converter PCB mod uses modern, readily available components to replace original, obsolete DRAM. The added benefit of this mod is that it also removes the inefficient need of +12v and -5v required by the original DRAM. All the original DRAM, associated decoupling capacitors, and power inductors are completely removed from the system. The new SRAM Conversion PCB then installs where the original DRAM was located, and specific required pins are then soldered in place on the PCB. The Converter PCB only requires 27 total solder pins verses the original 160 total DRAM, associated decoupling capacitors, and inductor solder joints and is designed to be soldered directly to the ColecoVision PCB without using any sockets.
Offer only applies to Colecovision TMS-RGB/Composite and Composite Full-Service Packages only. Kit is not necessary for F18a or PICO9918 installations.
You will have to purchase the Converter board and send it in with your console or have it shipped from Lundy Electronics directly to us.
Purchase Links (please choose the appropriate Converter Board for your console)-
Lundy Electronics NTSC Dram to Sram Converter Board (for North American NTSC consoles)
or
Lundy Electronics PAL Dram to Sram Converter Board (For Europe, Australia, etc. PAL regions)
We're offering a free installation of Lundy Electronics Dual LED Pause Kit for ALL Colecovision Full-Service Packages only.
What this kit does? (PLEASE READ)
The ColecoVision Ultimate Pause Kit is completely hidden from view without any modifications to the case and utilizes the existing console reset button to initiate pause mode. The reset button is monitored and will distinguish between a regular press for normal reset or long press to initiate pause mode. This kit offers the ability to pause your ColecoVision as well as offer added LED lighting indicators during normal and pause operation.
Colors available for the Dual LED Pause kit are red, blue and green only.
You will have to purchase the kit and send it in with your console or have it directly shipped to us.
Colecovision Dual LED Pause Kit
Dual LED Pause kit can now be ordered by the customer.
We're offering a free installation of Lundy Electronics' ColecoVision and ADAM 8 BIOS Selector kit.
What this kit does? (PLEASE READ)
The Lundy Electronics ColecoVision and ADAM 8 BIOS Selector kit replaces the factory BIOS chip and is the first BIOS mod offering all eight known BIOS images in one adapter without the need for case mounted switches or physical jumpers on the adapter PCB. This kit requires no modifications to the case or requires opening the case to select a different BIOS image after installation. You simply press a momentary button hidden out of view and accessed by opening the cartridge slot cover.
Purchase link-
Lundy Electronics ColecoVision and ADAM 8 BIOS Selector Kit
You will have to purchase the ColecoVision and ADAM 8 BIOS Selector kit and send it in with your console or have it directly shipped to us.
This offer is only valid if you're sending any console in for a Full-Service Upgrade Package already.
